Installing Evans waterless coolant eliminates many problems associated with water in conventional water-based cooling systems, while increasing reliability and engine life.

Evans is the only manufacturer of waterless antifreeze.

Waterless coolants provide sufficient heat transfer, boil at a higher temperature, and are non-corrosive.

This eliminates the vapor barrier that can cause hot spots and pre-ignition in engines with water based coolants.

Water has superior heat transfer capabilities but water’s low boiling point is close to the operating temperature of an engine, and water can cause corrosion. Evans Waterless Coolants have a boiling point of 375☏, well above the boiling point of other engine coolants.

It has been used by race teams around the world for years to keep their engines safe, no matter what the conditions. Waterless coolant is a glycol-based fluid that is ready to use, no water required. Evans Powersports waterless engine coolant, available in one gallon and a half-gallon bottle, is designed for motorcycles, ATVs, UTVs and snowmobiles.

Most engine coolants/antifreezes are a 50/50 mix of ethylene glycol and water. Evans Powersports Coolant provides permanent cooling protection for the life of the engine so replacement is never necessary.

Evans coolant eliminates many problems associated with water in conventional water-based cooling systems, while increasing reliability and engine life. Here’s what Evans says about its Waterless Powersports engine coolant: Evans High Performance Waterless Coolant is designed for all gasoline and light duty diesel engines. No Overheating: With a boiling point of 375F compared to only 226F for water-based antifreeze, Evans Waterless Coolants expand the range of safe operating. It is formulate to eliminate system corrosion, improve combustion, maximize HP, prevent boil-over and freeze-burst, and it is safe for pump seals and bearings. The boiling point is above 375 degrees and its antifreeze properties protects around -40 degrees. It contains no silicates or phosphates and requires no Supplemental Coolant Additive (SCA).

Life Span: Protects for life of the engine.Cycle News Staff | JanuEvans Waterless Powersports engine coolant is ready to use, no water required.

Powersports Coolant: For use in motorcycles, ATVs, snowmobiles.

Corrosive Properties: Unbeatable protection against corrosion and electrolysis. and use of Evans Waterless Coolants (often referred to as EWC throughout this document).

Benefits: Improves combustion, maximizes HP, prevents boil-over.

Antifreeze Properties: Protects below -40☌. Evans Waterless Powersports Coolant For motorcycle, ATV, UTV and snowmobile use This coolant eliminates pre-ignition and detonation caused by overheating.

Waterless Coolant for: MX bikes, trail bikes, enduro bikes, street bikes, quad bikes, ATVs, UTVs and snowmobiles.

Less Toxic: Evans Waterless Coolants have low toxicity. Evans Powersports waterless engine coolant, available in a half-gallon It has been used by race teams around the world for years to keep their They dont pull.

Freeze Protection: Evans Waterless Coolants freeze below -40☏. Evans Waterless Powersports engine coolant is designed for powersports racing, motorcycles, ATVs, UTVs and snowmobiles.Increases BHP: Evans Waterless Coolants eliminate pre-ignition and detonation caused by overheating - thus improving combustion efficiency and delivering more power.Prevents Corrosion: Evans Waterless Coolants contain no oxygen, effectively eliminating corrosion and pump cavitation.Reduces Pressure: Evans Waterless Coolants generate very low vapor pressures reducing strain on engine cooling system components.Eliminates Overheating: Evans Waterless Coolants have a boiling point above 375☏ and will not vaporize, thus eliminating overheating, boil-over and after-boil.Stable formula, will last the life of the application.Even under extreme conditions, Evans Powersports Coolant will not overheat and using. Will not boil over, freeze-burst, or corrode system. Evans Powersports Coolant offers improved performance and reliability.They don't pull over to let their engine cool down, and neither should you.

Powersports Coolant has been used by factory race teams around the world for years to keep their engines safe, no matter what the conditions. Evans Waterless Powersports engine coolant is ready to use, no water required. Evans Waterless Powersports Coolant is a proprietary base fluid with a specially formulated inhibitor package designed for all liquid-cooled powersports applications.

Which evans coolant powersports